Shield All

Protect your vinyl Curtain Walls with Goff’s Shield All. Shield All is an entirely water based product that forms a protective barrier between your curtain or spray booth and dirt or overspray.

The coating sprays on easily to all prep station and booth surfaces, sets a clear dry, tack-free film that is easily removed and replaced. Shield All may be applied to vinyl curtains, booth walls, lights, windows and light panels with the ability to be peel-able or washable when removing. Shield All withstands curing ovens when used on heated bake booths.

Directions:

Application and Removal On Vinyl Curtains

1. IMPORTANT – NEW CURTAINS often retain chemicals introduced during their manufacture which may prevent
2. Shield All from adhering initially. For best results, clean new curtains with Goff’s Curtain Cleaner or a mild detergent and soft bristle brush. If mask continues to “fisheye” when sprayed, apply a light tack coat, then a medium-wet cross coat to follow.
3. Make sure surface is dry.
4. Apply a single wet coat of Shield All to curtains. Do not force dry with heat. Average dry time is 10-30 minutes with sufficient air flow. Dry times vary with shop and weather conditions. (Average Coverage: 400sq.ft./gal.)
5. To remove mask, wet thoroughly with water and let stand
6. 10 minutes. Rinse curtains. Shield All will dissolve and appear as “suds” as it is washed off. Curtains are clean when suds are gone.

Washable Application & Removal On Booths

1. Make sure surface is dry.
2. Turn off all power to booth when washing over light panels.
3. Apply a single wet coat of Shield All to booth surfaces including walls, windows, doors, and light panels.* Booth fans may be turned on but not force dry with heat. Average dry time is 10-30 minutes with sufficient air flow. Dry times vary with shop and weather conditions. (Average Usage: 1 gallon per booth application.)
4. To remove mask, wet thoroughly with water and let stand 5-10 minutes. Rinse booth, Shield All will dissolve and appear as “suds” as it is washed off. Booth is clean when suds are gone.

Peel-able Application & Removal On Booths

1. Make sure surface is dry.
2. Turn off all power to booth lights when applying and washing over light panels.
3. Apply 2-3 medium-wet coats of Shield All to booth surfaces including walls, windows, doors and light panels.* Booth fans may be turned on but not force dry with heat. Average dry time is 10-30 minutes with sufficient air flow. Dry times vary with shop and weather conditions. (Average Usage: 2-2 1/2 gallons per booth application.)
4. To remove mask, peel away dried film and reapply as necessary. Shield All works great as a means of maintaining booth’s true lighting on lights and windows between booth cleanups.

Goff’s Enterprises LLC is based in Pewaukee, WI. We have been manufacturing a wide variety of flexible space partitioning products for over 30 years. Goff’s provides industries with custom products to improve safety, productivity, and profitability.